Mini LED Light Status Definitions

Mini LED Light Status Definitions

There are three status options for the Mini's LED status lights:


1. Green/Blue - Operational and Working Correctly

2. Green/Green - Operational but no valid Source (decode or encode)

3. Green/Red - Operational but no valid source (encode only)

    • Related Articles

    • Mini NDI User Guide

      Link: User Guide

    • Mini Factory Reset

      If you need to perform a factory reset on a BirdDog Mini, follow these directions: ~ power the unit on. ~ After the unit has powered on for a few minutes, press and hold the reset button (on the side) for 5 seconds.  ~ Release the button after 5 ...

    • Studio-NDI · Factory Image Process (REV4)

      The following is the complete factory re-image process. This process should fix: Studio devices that are "Stuck on Startup"  Startup and get stuck on the "IP scroll" during bootup  WebUI menu screens are corrupt and not displaying correctly.  Please ...

    • Studio NDI User Guide

      Link: User Guide

    • Simultaneous Encode & Decode for MINI & STUDIO (FW. 3.0)

      There is a beta feature in FW 3.0 that allows a BD STUDIO or MINI to encode and decode at the same time, two different NDI signals. This feature is a BETA feature because of a known issue, where the RX side of the unit (DECODE) drops frames every few ...