Firmware Update Instructions - MAKI Ultra
What you will need
1 x BirdDog MAKI Ultra firmware update .img file
Procedure
1. Download the firmware file from the BirdDog website and unzip.
2. Log into the camera BirdUI. The default password is ‘birddog’.
3. Navigate to the SYSTEM/SYSTEM UPDATE section.
4. Click the CHOOSE FILE button, navigate to the downloaded firmware folder, select the contained file and click the UPLOAD button.
NOTE: This process will take up to 5 minutes and will require the camera to reboot. DO NOT power off the unit while this process completes.
5. After the process reports as complete, allow 2 minutes for the camera to reboot and then refresh your browser.
6. Confirm the update by viewing the Dashboard/System Details/Firmware Version in the BirdUI. Check that the version number is correct for this release.
The update process is now complete.
Support Resources
BirdDog are committed to your success with our products and we have a team of global support engineers ready to help you. Should you need further assistance, please do not hesitate to reach out.
Email us at help@birddog.tv
Related Articles
BirdDog X1 / X1 Ultra Firmware Release Notes
Firmware 2.4.053 Important note - please power cycle your camera BEFORE applying this firmware update, and again after applying the update. New features and Improvements: Added a preview of NDI output in the CamControl panel of the BirdUI. Improved ...Firmware Update Instructions - X1 and X1 Ultra
What you will need 1 x BirdDog X1 or X1 Ultra firmware update .bin file 1 x BirdDog X1 or X1 Ultra camera. Procedure System Firmware Update This update is a single-step process performed from the BirdUI. 1. Download the firmware file from the BirdDog ...BirdDog X5 Ultra Firmware Release Notes
Firmware Version 0.3.0017.00 Important note - please power cycle your camera BEFORE applying this firmware update, and again after applying the update. This release includes the following fixes: Fixed an issue where Pan or Tilt controls would drift. ...BirdDog MAKI Ultra Firmware Release Notes
BirdDog MAKI Ultra Firmware Release Notes Firmware 8.1.31 This release contains the following features and fixes: Fixed the issue with the RESET button not working. Fixed an issue where by the camera could become unusable in the envent of a factory ...BirdDog MAKI Ultra VISCA commands
The BirdDog MAKI Ultra 12x and BirdDog MAKI 20x cameras support many controls over multiple protocols. One of the most commonly used protocols is VISCA. VISCA commands can be used either over the serial connection (RS485) on the camera, or over the ...