SRT Networking documentation

SRT Networking documentation

SRT Networking

To access BirdDog Cloud networking document click on the link

To access SRT Networking in the Haivision SRT Deployment guide click here

    • Related Articles

    • What is SRT Caller --> Listener?

      SRT Caller-Listener is a mode of operation for the SRT (Secure Reliable Transport) protocol, which is a low-latency, high-performance video streaming protocol that is designed to deliver high-quality video content over unreliable networks such as the ...
    • High latency on SRT connections

      If you are experiencing high latency, first make sure that you are using correct Timecode Handling and change to another to see if this helps. There may be an issue with the NDI source not producing consistent NDI Time Codes. High latency may also ...
    • No NDI output on a SRT connection

      After a connection is created, there is no NDI output or very low frame rate on the RX endpoint. Please try to use NDI Time Stamps as Timecode handling. Low frame rate could also indicate poor hardware performance. If there is no FPS shown on the RX ...
    • Troubleshooting "Connection Timeout"

      Connection Timeout is usually caused by the fact that the 2 EP cannot create the SRT connection on the selected UDP port. This can be caused either by a firewall configuration problem, or that the UDP port is currently being occupied. A previous ...
    • Why does a connection time out after it has connected and has been running?

      The "Connection Timeout" message may also appear if the SRT connection breaks and out endpoints are not able to auto reconnect. Should a connection break, it may be due to a RTT that is too high compared to SRT Latency setting. Please allow for at ...