Encoders/Decoders | All Devices

All Devices
Stuck on booting troubleshooting guide
If you have tried to update your 4K HDMI, SDI, or Quad you might run into where the OLED is stuck on booting for 30+ minutes. This is a symptom that the USB drive image file was not able to be mounted and read by the device. The device is rarely ...
Understanding 4K Family and NDI Signal Transmission
How Does the Device Work with NDI Signals? The 4K Family of devices (including 4K HDMI, 4K SDI, 4K QUAD, and OG4) help to connect your video sources, like cameras or computers, to your network using a format called NDI (Network Device Interface). ...
BirdDog 4K SFP+ Reccomendations
4K Quad, SDI, HDMI and OG4 SFP+ Recommendations Main factor is that the module and switch need to be SFP+ 10gig compatible. NOTE: A 10gig SFP+ on a 1 gig SFP port switch will not function correctly The BirdDog 4K unit does not need a specific brand ...
Factory Image Process for 4KFamily
** Please note, I am using a USB 3 stick in this video. 4KHDMI: 4K HDMI Image 4KSDI: 4K SDI Image 4KQUAD: 4K Quad Image WinRaR: https://www.win-rar.com/ BirdDog Downloads Page: https://birddog.tv/downloads

Popular Articles
Can't Hear End-units or Director on Comms
Common things to check when you are on a one way conversation: Microphone is correct jack on computer (TRS or TRRS) Microphone is selected as default communication device (Control Panel --> Sounds --> Recording tab) before Comms is opened Comms was ...
Reducing Latency with the P200
There are a few options within the P200 camera that can be changed to reduce latency. These suggestions assume that the camera is using the latest firmware version. Before attempting to make these changes, please check the firmware website and verify ...
Simultaneous Encode & Decode for MINI & STUDIO (FW. 3.0)
There is a beta feature in FW 3.0 that allows a BD STUDIO or MINI to encode and decode at the same time, two different NDI signals. This feature is a BETA feature because of a known issue, where the RX side of the unit (DECODE) drops frames every few ...
Studio-NDI · Factory Image Process (REV4)
The following is the complete factory re-image process. This process should fix: Studio devices that are "Stuck on Startup" Startup and get stuck on the "IP scroll" during bootup WebUI menu screens are corrupt and not displaying correctly. Please ...
BirdDog P200 - Revision number verification tool.
BirdDog Eyes P200 has two distinct hardware revisions, it is important to know what revision number you have when updating to some newer versions of firmware. There are several ways to identify the hardware revision of your camera. Jump to the bottom ...

Encoders/Decoders | All Devices | Knowledge Base

All Devices

Stuck on booting troubleshooting guide

Understanding 4K Family and NDI Signal Transmission

BirdDog 4K SFP+ Reccomendations

Factory Image Process for 4KFamily

Popular Articles

Can't Hear End-units or Director on Comms

Reducing Latency with the P200

Simultaneous Encode & Decode for MINI & STUDIO (FW. 3.0)

Studio-NDI · Factory Image Process (REV4)

BirdDog P200 - Revision number verification tool.