BirdDog OG4 Firmware Update Instructions
What you will need
1 x BirdDog Gear firmware update .fw file
Procedure
1. Download the firmware file from the BirdDog website and unzip.
2. Log into the converter BirdUI by entering the device IP address into your web browser. The default password is ‘birddog’.
3. Navigate to the SYSTEM tab on the left hand side.
4. Under the System Update section Click the CHOOSE FILE button, navigate to the downloaded firmware folder, select the contained file and click the UPLOAD button.
NOTE: This process will take up to 5 minutes and will require the converter to reboot. DO NOT power off the unit while this process completes.
5. After the process reports as complete, allow 2 minutes for the converter to reboot and then refresh your browser.
6. Confirm the update by viewing the Dashboard/System Details/Firmware Version in the BirdUI. Check that the version number is correct for this release.
The update process is now complete.
Support Resources
BirdDog are committed to your success with our products and we have a team of global support engineers ready to help you. Should you need further assistance, please do not hesitate to reach out.
Email us at help@birddog.tv
Related Articles
PLAY Firmware Update Instructions
BirdDog PLAY Firmware Update Instructions What you will need 1 x BirdDog PLAY firmware update .fw file 1 x BirdDog PLAY unit Procedure System Firmware Update This update is a single-step process performed from the BirdUI. 1. Download the firmware ...BirdDog 4k Quad Firmware Update Instructions
What you will need 1 x BirdDog 4K Quad firmware update .fw file 1 x BirdDog 4K Quad Unit on firmware 5.5.273 or higher Procedure System Firmware Update This update is a single-step process performed from the BirdUI. 1. Download the firmware file from ...BirdDog 4K HDMI Firmware Update Instructions
What you will need 1 x BirdDog 4K HDMI firmware update .fw file 1 x BirdDog 4K HDMI Unit on firmware 5.5.273 or higher Procedure System Firmware Update This update is a single-step process performed from the BirdUI. 1. Download the firmware file from ...BirdDog 4K SDI Firmware Update Instructions
What you will need 1 x BirdDog 4K SDI firmware update .fw file 1 x BirdDog 4K SDI Unit on firmware 5.5.273 or higher Procedure System Firmware Update This update is a single-step process performed from the BirdUI. 1. Download the firmware file from ...Updating Firmware for BirdDog Studio NDI
Updating firmware on BirdDog Studio NDI is simple and fast, please follow the following steps to update your device. 1) Log onto the web interface of your BirdDog Studio NDI. To access the web interface of Studio NDI, open your favourite web browser ...