BirdDog P200 - Revision number verification tool.

BirdDog P200 - Revision number verification tool.

BirdDog Eyes P200 has two distinct hardware revisions, it is important to know what revision number you have when updating to some newer versions of firmware. There are several ways to identify the hardware revision of your camera.


Jump to the bottom of this article to use the lookup tool.


Firstly you can look at the barcode located as per the diagram below on the bottom of your camera, the last two digits of the first group of numbers are the important digits.

If they are A1/A2/A3 then you should use A2/A3 firmware provided by BirdDog.
If the last two digits are anything other then you should use A4/A5 firmware provided by BirdDog.



Alternatively you can locate the currently running MCU (Master Control Unit) firmware version via the cameras OSD (On Screen Display). The OSD is accessible via the cameras remote control by pressing MENU.


Once the OSD is open, navigate to the SYSTEM menu. 

The current firmware is listed under the SV number


You can enter this 18 digit SV number in the verification tool below to confirm the camera hardware revision you have.




    • Related Articles

    • BirdDog Camera Firmware Release Notes

      All 4K Cameras Due to internal BirdDog requirements, our firmware releases don’t always have sequential numbering. To upgrade the firmware, please follow the Firmware Upgrade Instructions located in your firmware download. IMPORTANT After the update ...
    • BirdDog MAX Firmware Release Notes

      Firmware Version 6.1.064 New Features and Improvements Added a early look at multilingual support for the BirdUI. Updated BirdUI Text [Restore Factory Defaults] now reads [Factory Reset] - the functionality has not changed. Added a shutter speed ...
    • BirdDog X5 Ultra Firmware Release Notes

      Firmware Version 6.1.033 New Features & Improvements: Improvements to FreeD integration. Improved image clarity, and enhanced edge detail. Improved auto focus performance. Updated NDI library to NDI 6.1. Updated firmware version naming convention to ...
    • BirdDog X1 / X1 Ultra Firmware Release Notes

      Firmware Version 6.1.064 New Features and Improvements Added a early look at multilingual support for the BirdUI. Updated BirdUI Text [Restore Factory Defaults] now reads [Factory Reset] - the functionality has not changed. Added a shutter speed ...
    • MCU Update Tips for P-Series Cameras

      Symptoms of MCU Update Failure Sometimes, when attempting the MCU portion of the firmware update for our P-Series cameras, the MCU update does not complete properly. There are a few things that may indicate an unsuccessful MCU update: The MCU number ...